Last weekend I had the pleasure of visiting HOODandGAG in Berlin. He has an excellent playroom. The following video depicts my first ever experience with SCUBA gear.
We all love rubber as a material, but at least for me, some of the less favourable features of rubber includes its strong friction against anything and everything, without suitable lubrication. This results in rubber clothing being occasionally difficult to put on, and uncomfortable to wear if the lube wears out. Also, excessive friction increases the tendency of rubber to tear.
Chlorination of rubber, which is the exposure of the surface of rubber to chlorine gas, aims to solve this problem. Chlorine, while interacting with rubber, changes the surface structure of rubber, reducing its friction.
This change can be dramatic: when I chlorinated a rubber catsuit I could not put on even with lubrication, after chlorination it slid on without any lubrication whatsoever.
While some rubber vendors have already started to offer chlorination as a service, it is extremely easy and cheap to do it home. I have chlorinated several pieces of my wardrobe, including a full catsuit, without any problems, and I am in the process of chlorinating my entire rubber collection.
WARNING: Chlorine gas is toxic and corrosive to lungs. Never do chlorination indoors, even in ventilated areas. Chlorine gas is heavier than air and will remain in areas, and possibly travel downwards in a building ventilation system. ALWAYS DO CHLORINATION OUTDOORS WHILE WEARING NECESSARY PROTECTION.
What do you need for chlorination?
- Plastic bucket, between 10 and 20 litres
- Warm water
- A gas mask with activated carbon filter (this includes most modern gas masks filters)
- Rubber gloves
- Household bleach with approximately 5 percent sodium hypochlorite (check the label)
- White vinegar (10% acetic acid). Skip the high-end cooking stuff and get the most industrial looking bottle you can find.
Preparing rubber for chlorination
Before treating the rubber, it must be completely clean of all dirt, stains, grease and lubrication. Especially silicone is notoriously difficult to remove, but I have found dishwashing liquid to be a great help. Parts of the rubber covered by stains or lube will not be treated and will remain sticky after chlorination.
1. Fill plastic bucket 75% full of warm water.
2. Insert garment to be treated
3. Insert 400 millilitres of white vinegar and stir briefly
4. Wear your gas mask
5. Insert 300 millilitres of household bleach, and stir immediately for 60 seconds. You will notice the surface appearance of the garment change immediately. Do not expect bubbling or a dramatic chemical reaction.
6. Rinse the garment under clean, cold water and leave to air dry.
If you want to repeat the process, you can use the processing liquid again by adding again 400 millilitres of white vinegar and 300 millilitres of household bleach.
Other things to note
- Chlorination will only occur when rubber is in direct contact with the gas being formed in the liquid.
- Most of the time a garment needs to be treated twice, turning it inside out between treatments.
- Multiple treatments do not harm rubber. If the process fails, the surface simply remains unchanged.